| Note:
When using forklifts or other
mobile devices to lift or move slabs, we recommend operating
only on smooth, level surfaces and avoiding potholes or rough
surfaces. Vibrations from forklifts and lifts can cause jigs to
loosen or damage the jigs and forklifts.
1. When carrying out lifting
operations, please carefully consider all safety regulations and
current regulations.
2. Only allowed to train, have
the ability to operate, and familiar with the operation
instructions and safety regulations of the personnel operation.
3. Check the fixture. Cannot be
used if the clamp is worn or damaged.
4. Choose the appropriate size
of the fixture to work. Determine the weight of the board to be
hung. Do not exceed the load limit indicated on the fixture. The
thickness of the sheet must be controlled within the limits
specified by the manufacturer.
5. All people do not approach
the fixture that is lifting or moving.
6. Grip depends on friction.
Check that the surface of the rubber pad is free of dirt, grease
and other things that may reduce the effect.
7. Do not lift wet plate. The
grip depends on the friction. Lifting wet sheets may cause the
rubber mat to lose its grip.
8. Do not hang more than one
sheet at any time.
9. Clamp in the center of the
plate to maintain balance when loading.
10. Ensure that the plate is
fully clamped on the fixture during operation.
11. Slowly lift the board.
Check that the lifting tension is in proper balance.
12. When lowering the plate to
the rack, do not lower the fixture to other plates or materials,
otherwise the fixture will release its load.
13. Before lifting any product,
it should be checked whether the hook is worn, if there is wear,
it should be replaced, when the product is clamped to the jig
with the hook, the rotation of the product will cause the hook
to be easily damaged. |
