Universal Cutter Grinder 220V

Universal Cutter Grinder 220V




Product Introduction
1.Work light 2.Spindle angle adjustment handwheel 3.Water outlet pipe 4.Grinding wheel guard 5.Indexing locator 6.Tool holder adjustment handwheel 7.Knife holder locking handle 8.Workbench locator 9.Drag plate adjustment handwheel 10.Spindle lifting handwheel 11.Control electric box
Application
This machine tool is mainly used for grinding various hard alloy cutting tools. With corresponding accessories or fittings, it can also grind different specifications of gong milling cutters, woodworking drill bits, woodworking planers, and different specifications of circular saw blades. At the same time, it can also be used for grinding and processing different specifications of milling cutters and circular saw blades in other mechanical industries. The spindle angle adjustment adopts a worm gear structure to ensure the accuracy of angle adjustment, and the indexing positioning is fast and accurate. It has wide applicability, flexible operation, and high precision. It is an essential grinding equipment for furniture factories and tool manufacturers.
Parameter
	Voltage	220V
	Main motor power	0.37Kw
	Water pump power	0.04Kw
	Maximum rotation diameter of the tool	360mm
	Grinding wheel speed	3500r/min
	Grinding knife lifting height	200mm
	Grindable saw blade size	Φ90-Φ630mm
	Tool holder stroke	285mm
	Grinding wheel rotation angle	±45°
	Grinding wheel specification	10mmXΦ32mm(Φ16mm) XΦ150mm
	Lighting specification	24v-20w
Usage and Adjustment

1.Operation method for shaping blade grinding a.Loosen the locking screw of the tool shaft, remove the tool spacer, select the appropriate spacer, and insert the required sharpened tool onto the tool shaft. Tighten the screw to secure the tool. b.Loosen the positioning sliding screws on the left and right sides of the workbench, adjust to the desired position, and then lock the positioning screws. Release the locking handle of the tool holder shaft, adjust the tool holder seat to maintain the correct pitch angle and left right angle between the tool and the grinding wheel, and ensure that the blade surface is parallel to the grinding wheel surface before locking the wrench. c.The distance between the cutting tool and the grinding wheel is adjusted by the lifting handwheel of the grinding wheel. After the angle and distance of each part are adjusted, the workbench can be pushed to grind the grinding angle of the cutting tool. d.When replacing one side of the tool with the other after grinding, release the locking handle of the tool holder shaft, rotate the index handwheel, switch to the desired angle, and then lock the tool holder shaft to grind the other blade.
2.Operation method for grinding circular saw blades a.Remove the tool holder shaft and install the equipped circular saw blade sharpenerdevice. b.According to the size of the saw blade diameter, adjust the saw blade diameter to adjust the sliding rod to the appropriate position, and then release the locking handle of the locator to adjust the locator to the appropriate height. c.Move the position of the drag plate, loosen the angle adjustment screw of the grinding wheel, adjust the required angle between the grinding wheel and the saw blade, align the alloy profile of the saw blade with the plane of the grinding wheel, and then tighten the angle adjustment screw. d.Rotate the lifting handwheel of the grinding wheel to align the center of the grinding wheel with the plane of the saw blade, and push the workbench to grind the circular saw blade.
3.The operation method of grinding the gong milling cutter and drill bit Replace the equipped gong-milling blade grinding device, install the grinding wheel upside down and tighten the screws, rotate the grinding wheel lifting handwheel and adjust the position of the drag plate to make the gong-milling blade surface fit the grinding wheel, and then adjust the position of the stroke positioning block. If there is a special tool that needs to swing the tool holder angle, loosen the screw behind the adjustment seat and adjust it to the desired angle to grind.
4.The grinding operation method of linear knives a.Install the equipped linear tool holder on the tool holder shaft, place the blade on the fixture, and lock the locking handle of the blade pressing plate. b.Rotate the spindle lifting handwheel, adjust the distance between the blade and the grinding wheel, and then adjust the drag plate and tool holder axis to make the grinding wheel and the blade form a flat surface. c.Rotate the indexing locator handwheel, adjust the angle of the required sharpening tool, lock the tool holder screws, and then adjust the position of the stroke positioning slider according to the length of the processed blade. Push the workbench to grind.
Attention
1.After each shift is completed, please clean the track and worktable,remove stains from the tool holder shaft, worktable, and adjustment carriage, and apply engine oil to prevent rusting. 2.Oil should be added to the track every shift, as a knife grinder is a relatively precise blade grinding machine. Therefore, it is necessary to maintain the cleanliness of the track and knife holder shaft when using it. 3.When lifting and lowering the spindle, please pay attention to releasing the locking handle, and each adjustment part should be filled with lubricating oil every shift. The lifting column should not stay in a certainplace for a long time, and should be lifted and lowered several times frequently. 4.After each use, make sure to place the workbench in the middle and do not push the workbench too hard to avoid deformation of the track due tolarge impact forces. 5.The equipped protective cover must be used to ensure the safety of the machine tool and the operator. 6.Individuals who are not familiar with the structure and performance of this machine tool are not allowed to operate to avoid accidental damage to the machine too.
Product Display

Note
The power cord needs to be provided by the customer, and the machine is only a test line. The wiring method is as follows.
Item Number:153211

You can make order with no worry. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Warranty: 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.