Ten Head Ultrasonic Mister
Durable ultrasonic humidifying module with energy saving.
Minimum water level shut down protection.
60C over temperature shut down protection.
Input voltage polarity protection. (No operation as incorrect polarity)
Power delay ON protection to prevent voltage surge.
Each mist making head with individual circuit and will not completely shut down as one of heads failure.
Each mist making head with auto-tuned current limiter to prevent over current drain.
Note :This item is only a part, couldn't use the mister without DC Power
2¡¢Connect the mist maker\fogger to the output of switching power supply.
3¡¢Connect the power line from the mains to the switching power supply. Be sure the liine voltage should be within specified limit. (Don't too deep of water level which will affect the mist making effect.)
4¡¢Switch on the power and a LED indication on water level sensor is light on.
|
Dimensions |
252L*90W*55mmH(9.9¡±*3.5¡±*2.2¡±) |
|
Input Voltage(Mist Generator) |
DC48V |
|
Working current |
4.8~5A |
|
Power Consumption |
300W maximum |
|
Output Mist Capacity |
3000~4500ml/hr |
|
Cooling way |
Air cooling |
|
Weight |
1.8Kg |
