Earth Auger and Ice Drill Machine

Engine type

IE-51

Output volume

59cc

Power

2.0kw/7500r/min

The ratio of fuel

93#gasoline 25 : two stroke engine oil 1

Tank volume

1200ml

The diameter of the drill

12mm

Instruction
  • The fuel oil distribution,93# gasoline and two stroke engine oil, according to 25 to 1 to mix them together, the % of the two is 25 to 1. Not in the interface of 50 to 1.
  • Open the throttle switch, throttle switch to Off position mean that the start switch can be opened. (Note: throttle switch is besides the pull start which could be plucked up and down)
  • Push the throttle switch to the 1 and half station, then gently pull start handle 2or 3 times, after hearing slightly bomb sound, turn the throttle switch to the on (down) station. Plug the start pull then the engine could be start normally.
  • Put the engine station throttle switch to the on (down) station, when the engine spin speed slows down or in slow speed spin about 1 minute, then turn the switch to turn it down.
    (Note: Forbidden to stop the engine in high speed.)
  • On the first use, the engine could better be in low and middle speed working condition, which could match each accessories fully.
  • Gear box in first use could be worked 10-20 hours. Screw the nail from the side-way, fill in the grease to avoid being abrasion. Grease should be better used in anti-high temperature kind.

¡¡

Item Included(160880):

Earth Auger and Ice Drill Machine

¡¡