Electric Noodle Maker 220V

Parameters: 　 Voltage:220V Frequency:50-60Hz Power:750W Noodle width (flat noodle): 3mm and 9mm Thickness of dough: 0.004in-0.2in (0.1mm-5mm) Size:16*12.5*15.5in (408*315*395mm) Operation: 1, Take down the noodle cutter, adjust the roll knobs of two sides, two sides must agree, press for 4-5 times. 2, Install the noodle cutter (need to start the motor), adjust the noodle cutter knobs, two sides must agree, fine noodle (clockwise), thick noodle (anticlockwise) 　 Note: 1, Often add the vegetable oil on the turning gear. 2, Forbid to clean the machine with water, please hold some cooking oil after clean it with brush. 3, It is normal that the motor is hot after working for 1-2 hours. 4, Do not touch the roll and noodle cutter by hand when machine working. 5, Connect the ground wire. 6, Tighten the knob to avoid the cutter and roller shaking.

Features:

Detials:

Item included(170639):

1pc Electric Noodle Maker 220V