Electric 7¡° Circular Saw 220V
| Type | M1Y-FF03-185 |
| Voltage | 220V |
| Frequency | 50Hz |
| Power | 1400W |
| Rotation speed | 5300r/min |
| Oblique Angle | 45 degree |
| Saw blade Size | 7.2*0.7*0.06inch |
| Weight | 11lbs |
1. Grip on the saw with both hands, arms can be positioned against the back stretch. The body is not aligned with either side of the saw blade.
2. When the blade stuck, or sawing interrupted for any reason, release the switch trigger and hold the saw does not move in the material until the blade has completely stopped. The blade is in motion or may not occur in case attempts to rebound away from the workpiece or the saw backward pull circular saw.
3. When restarting the circular saw in the workpiece, the saw-tooth blade alignment cuts and check whether the inserted material
4. Support large sheet to reduce harm blade squeezed and rebound
5. Not use dull or damaged blade
6. Before sawing, sawing depth and angle adjustment locking must be tightened and tightened.
