Clay Craft Ceramic Pottery Machine 110V

Specification

The machine has a beautiful appearance, compact structure, small footprint, shelter and good, flexible operation, stable speed, low noise and reverse steering switch, etc.

Parameter
Voltage 110V
Size 20.8inch*16.5inch*13.7inch
Rotating speed 300r/min
Rotating direction Positive and negative direction reversible
Funtion

1.Casting machine after installation, first make sure that all switches are in the off position, namely earth leakage circuit breaker (main power switch), position switch should be under, trans, down, Shun switch (stop switch anyway) should in the stop position;

2.The casting machine power plug and insert 220v power outlet, open leakage circuit (up position) Power light is bright;

3.According to the casting habits, rotation inverted switch to the desired direction of rotation position.
4.The foot control, feet gradually force (manual levers evenly forward), the strengthening or rod forward, working turntable begins to rotate, with feet or rod to strengthen the force of propulsion, working turntable speed gradually increases. Until the operating requirement.

Installation
The aircraft in the installation process must ground level, temperature 40 degrees Celsius, the user must do according to electrical safety standard single-phase three-wire plug.

Item#

Description

QTY Unit Note
230519 Clay Craft Ceramic Pottery Machine 110V 1 set ¡¡