|
|
新建网页 3
新建网页 2
新建网页 5
|
220V Double
Roller Crusher
|
|
|
|
|
|
The roller crusher is mainly composed of
rollers, roller support bearings, pressing and adjusting devices, and
driving devices. A wedge or gasket
adjusting device is installed between the two rollers. The top of the
wedge
device is equipped with an adjusting
bolt. When the adjusting bolt pulls the wedge up, the wedge pushes the
movable rolleraway from the fixed
wheel, which has low noise and dust. Less, stable performance,
convenient maintenance, etc. |
 |
|
Parameter |
 |
|
Model |
200*75 |
|
Roll size (diameter × Width) |
200*75mm （7.9”*3”） |
|
Maximum loading size |
10mm （0.4”） |
|
Discharge particle size |
0-4mm（≤0.16”） |
|
Production capacity (when the
roller gap is 4mm) |
860
kg/h |
|
Roll rotation speed |
450
rpm |
|
Pulley size |
280*60mm（11”*2.4”） |
|
Motor power |
1.5
kW |
|
|
Product Detalis |
 |
 |
 |
|
Using ＆ Maintenance |
|
（1）Check carefully whether the fasteners
are firm and tight. （2）Whether
the transmission belt is in good condition. If it is damaged, replace it
in time, and wipe it clean
when there is oil on the belt or
pulley.
（3） After checking that all parts of
the machine are normal, it can be started.
（4） The machine is only allowed to
start when there is no load.
（5）After starting, check the direction
of roll rotation.
（6）After starting, if an abnormal
situation is found, the machine should be stopped immediately, and the
cause can be found before restarting.
（7） If there is a jam or shutdown
during use, immediately cut off the power supply and remove the
material.
（8）Keep the machine clean. After each
use, wipe off the dust and coal dust on the machine in time. |
|
Application |
This machine is a smooth double-roller crusher, which
is suitable for the laboratories and laboratories of
geology, metallurgy, building materials, chemical
industry, coal, mineral processing, scientific research
institutes, colleges and universities, etc. to crush
all kinds of medium and low hardness For ore or rock, its
compressive strength is not higher than 700 kg/cm.
|
 |
 |
|
Note:This machine has no plug and needs to be connected to the air switch
for use by the
customer (we have a video of the wiring, if you can't wire it, you can contact us for a video
reference)
|
|
Item Number: 021535 |
|
|
You can make
order with no worries.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost. |
|
