|
1. The use of electric shock hog,
effortlessly, no bending, no harm pig skin.
2. Battery diversity of choice (rechargeable battery / battery section
II D).
3. Switching discharge, more energy security.
4. With the new design, the use of appropriate stimulation current
physical stimulation of pigs, pig to avoid injury.
5. Charging time 6 hours of continuous work, more power. |
![https://topseller365.com/data/prd/154/129/666.jpg](https://topseller365.com/data/prd/154/129/666.jpg) |
![https://topseller365.com/data/prd/154/129/444.jpg](https://topseller365.com/data/prd/154/129/444.jpg) |
1. To charge the unit, use the
included Linher electronic charger:
a. Unscrew the screw and remove the end couver.
b. Slide the rechargeable battery pack out or leave there.
c. Plug the charge pin into the pack, then connect the AC power.
d. The RED charger light is on, indicating that charging is in progress.
e. Wait 8-10 hours or until the RED charger light turns GREEN.
f. Replace the pack; replace the end cover and the screw.
2. If unit is not used for extended
periods of time, remove the battery pack for storage.
3. If the unit is dropped in standing water, remove the battery pack, to
ensure there is on water inside. If water is present, allow battery to
air-dry for 24 hours. Ensure there is no moisture in the battery pack or
handle unit before using or storing.
4. When the prod is not in use, attach the safety clip to the trigger
button to avoid accidental discharge. 5. Always us a
shaft length that allows you to maintain a safe working distance form
all livestock.
6. To attach the shaft to handle unit, place shaft onto handle and
tighten white collarnut.
7. To remove the motor, unscrew the brass nut and remove the end cover,
slide the battery case out and then alide the motor out. If the motor
won’t come out. You should remove the shaft and push the motor out from
the shaft end of the handle. Then you can replace the
motor.
8. To use the prod, remove the safety clip from the trigger button and
place the wrist strap around your wrist. Press the trigger and place the
contact points of the prod on the rear of the animal. For baest results,
simply press, touch and release.
9. Operators are encouraged to minimize use of stock prod.
10. Use caution when using the Linher prod on wet animals because of
potential increase in intensity. |
Item Included
1 Set of Electric
Shocker Prod (154129) |
|