|
|
|
|
|
|
|
|
|
|
Hole drilling machine for engineering machinery is a portable processing
equipment developed for field service of engineering machinery, which is
mainly used in processing of small-scale pipeline inner hole and
concentric span hole, and widely applied in engineering machinery,
including excavator, crane, loader, and hoist.
|
|
Main Technical Parameters
|
|
The maximum processing hole diameter: Ф180mm
The minimum processing hole diameter: Ф45mm
The maximum processing travel: 380mm
The maximum feed depth: 2mm on one side (A3 steel)
Surface roughness: Ra3.2
Deviation from circular form≤0.02mm
Gross weight of equipment: 95.65KG
Rotate speed: 0-83RPM
Boring bar: 40*1500mm
Power: 1.5KW
Voltage: 110V
Host size: 56 * 35 * 37cm
Boring bar length: 1500mm
Diameter: 40mm
|
|
|
Features
|
1.By adopting 110V continuous current motor with characteristics of
low-speed of revolution and high torque, the complete machine can
realize stationary machining in superior performance.
2.Feeding and processing can realize electrodeless speed regulation.
Feeding process can be set according to demands, and processing can
automatically stop after reaching the limit switch.
3.Boring bar adopting high-strength alloy and structural steel is
featured with high hardness, high accuracy, high tenacity, good abrasion
resistance, etc.
4.The boring bar can be disassembled separately to make installation
convenient.
5.The control cabinet is installed below the main engine to be
beneficial to safety operation.
6.Electric motor controller is equipped with dynamic delay brake program
to avoid vibration in shutdown.
|
|
Attention
|
|
This machine is installed by fixed clamping, and uses different tool
rest according to different diameter ranges. Please confirm the diameter
of processing hole before use to select the appropriate tool rest.
|
|
|
|
|
Packaging List
|
|
1. Host * 1
2. Handle controller * 1
3. Centering cone * 4 (2 large and 2 small)
4. Front bracket * 1
5. Rear bracket * 1
6. Knife holder * 1
7. Knife disc * 1
8. Knife handle * 1
9. Blade * 10
10. Support bolt * 8
11. Support bolt and nut * 16
12. Wrench * 1
13. Internal hexagonal wrench * 1 set
14. Spare screws * 1 pack
15. Oil pot * 1
16.Boring bar * 1
|
|
Item Number: 022810
|
|
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost.
|
