|
Torque Wrench
|
Torque Wrench
(1/2" 0-300Nm) |
|
Parameter |
Model |
TLB300 |
Torque Range |
0-300N.m |
Precision Guarantee Range |
60-300N.m |
Drive side tenon size |
0.5”×0.5” |
Appearance size |
21.65”×2.83”×2.95” |
Weight |
7lb |
Scale scribed line |
3N.m/grid |
|
Features |
|
|
Panel mirror
processing
|
|
|
|
- Suitable for 1/2-Inch socket.
|
- The
humanized handle design
|
Overview |
1.
Torque wrench is a kind of very sophisticated equipment. It is only
used to tighten screws, bolts and nuts to the required torque.
2. Don't let it used as a crowbar or general ratchet wrench.
3. Do not use the wrench as a hammer.
4. When using, do not exceed the maximum torque value of the wrench.
Applying force can only handle again, do not attach any extension rod
on the product.
5. Wrench torque values must be adjusted to the same as the required
torque value. If you adjust the torque value is too large or too
small, both can seriously damage your wrench screw equipment.
6. Don't disassembling the wrench. Incorrect disassembling may cause
the damage to the internal structure, which can seriously damage the
wrench.
7. It must be checked regularly. |
Using method |
TLB type torque wrench is a kind of used for threaded
fastener torque measuring instrument indicator, It can be in the
range within the scope of any testing. Suitable for high accuracy
requirements of fastening torque test.
1. Before using, you must adjust the zero firstly!
(1) Choose the correct sleeve, then set on the wrench.
(2) Rotate the dials on the black table cover, make the primary
pointer to 0.
(3) Rotate the yellow bottom on the cover,make the driven pointer close
to the active pointer.
When clockwise, let the yellow pointer on the right side of the black
pointer.
When counterclockwise, let the black pointer on the right side of
the yellow pointer.
2. When using, you should exert tighten slowly and steadily, until
driven a pointer to the required torque value.
3. When stop work, active pointer automatic back to zero, driven
pointer is still on the scale value of directives, and can accurately
read torque values. At the top of the knob and rotating dial, driven
pointer also return to zero, the next time can be use. |
Item
Included:(022034)
1. Torque wrench *1
2. Instruction *1
|
|
|