Sign in or register

My Techtongda

 

   
Home&Garden,Lab > Tools>
020154:Auto Electric Cans Sealer 110V
Unit:
set
UPC:
MPN:
Weight:
78.00kg
     

Similar products

211048:Block Chain Hoist Ratchet Type

220161:FTTH Tools Fiber Optic Fast Connector

240031:20Ton Hydraulic Shop Press Floor Press H Frame+jack-2 cartons/set

020363:Ellipse Manhole 430*330

020364:Ellipse Manhole 550*450

110v Auto Can Sealer(85mm)

http://topseller365.com/data/prd/020/154/6.jpg
http://topseller365.com/data/prd/020/154/20.jpg
Introduction

 

The mold is 85mm, if you want to seal other size of cans, please contact us before place an order.

The machine is suitable for all kinds of  circular iron, plastic cans, paper cans and other round containers (the material of the can body is relatively soft and cannot be sealed). It is reliable in quality, easy to operate and lighter in weight. It is an ideal for the food and beverage industry equipment..

 

Attentions


(1)Lock all the screws and nuts before use, keep the clean about work plate and each part.

(2)Pour lubricating oil into each working part especially the lift table and the gear.

(3)If exceptional situations, check and troubleshooting.

(This product has been tested and proved to be qualified for delivery in conformity with standard.)

 
http://topseller365.com/data/prd/020/154/8.jpg
Parameters

(1)Productivity:10-20/min

(2)Range:φ45-100mm(1.75’’-3.94’’)

(Our standard machine is 85MM, and we can also customize molds in the range of 45-100MM. If you need it, you can contact us for customization.)

    Height:45-200mm(1.75’’-7.8’’)

    (others need customized)

(3)Power:370w

(4)Dimension:41×30×68cm(Desk Type)

 

Operations
(1)Adjusting:

1)Top mould, lower mould and tools should be prepared.

2)Loosen the nut between the top pressure head and base plate.

3)Replacing the top mould and lower mould respectively.

(1)Adjusting height of the can, turn off the on-off of  top mould and lift, lift the lower mould by inching to the position that hob touch the top mould. Loosen the nut on adjusting screw rod and adjust the height according to the can, put a can with cover to adjust the top mould touch it just then rotate the screw rod to lift the can 2-3mm to let cover keep sealing and rotating then lock the nut.

(2)Adjusting hobs, don't make the hobs touch the top mould when adjusting or damage them. From left to right, rotate the can shaft by inching to make the highest point of left can toward the bearing of hob. Then adjust the distance between left hob and top mould about 2mm and ensure the distance between the upper edge of hob and top mould about 0.5-0.8mm that vary based on the thickness of the plastic can. After that, lock the nuts on base plate. The left hob effect the roll rim and the right hob effect shaper. The method of right hob adjusting is the same as left hob, only the distance between the upper edge of hob and top mould about 1.0-1.5mm.

 

Details

 

http://topseller365.com/data/prd/020/154/13.jpg
http://topseller365.com/data/prd/020/154/16.jpg
http://topseller365.com/data/prd/020/154/18.jpg
Item Include:110V Auto Can Sealer*1
Item Number: 020154

You can make order with no worries.
Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

无标题文档

About Us

Copyright techtongda365.com All Rights Reserved