Sign in or register

My Techtongda

 

   
Home&Garden,Lab > Automotive Tools & Supplies>
134159:Hydraulic Oil Filter Cart 220V
Unit:
set
UPC:
MPN:
Weight:
77.00kg
     

Similar products

211004:Gas Chainsaw Chain Saw

134136:hydraulic hose crimper

141078:Double Side 8 Pipe Hydroponic 70 Plant Site Grow Kit

220009:5 Ton Hydraulic Gear Jaw Rotor Wheel Hub Puller Bearing Separator Tool Set Kit

021186:Flaring Copper Tube Non-Ratcheting Flare Tool

无标题文档
Hydraulic Oil Filter Cart
1.Fine filter
2.Discarge valve
3.Pressure gauge
4.Safety valve Pump
5.Pump
6.Motor
7.Rough filter Magnetic filter
8.Magnetic filter
Instruction:
LUC serious of pushcart filters are a special filtration device not only for the oil flowing to a tank but also for filtering the oil in hydraulic system .These kinds of filters are made into good structure,easy using and long service life and also have high filtration low noise.They are also be used as a by-pass filter outside a hydraulic system.
Technical data:
Size: H 920 A 470 B 350 (mm)
Usage and maintenance
1. Avoiding the possible counter rotation of the oil pump while starting the machine ,otherwise it may lead to the out blown of the axle seal and entering of air .
2. Air might be introduced into the machine during the operation and affect the oil flow.To insure the rates flow and normal operation of the fine filter element ,the discharge valve should be opened in time to release the air until oil can be seen at the outlet of the discharge valve,then close the discharge valve closed.
3. After a certain period of operation,coarse cleaner could be gradually contaminated and noise of pump might occur.You should stop the machine in order to clean the filter element .
4. Dir might stick to the elements of fine filter,causing a rise of the pressure in the filter bowl,When the pressure hits 0.4MPa.The element should be the changed in time .
5. The Suction and oil outlet tube should always be kept clean. 6. Should the pushcart filter fail to pump oil,please check:
a. The rotating direction of the pump
b. Whether the sealings between the tank and oil inlet are properly.
c. If the elements of rough filter are stuck
7.If the oil flow distinctly reduced.Please check :
a.Whether the elements of rough and fine filters are stuck with filth.
b.Whether an out blown of the axle seal has occurred due to wear or counter rotation.
8.If a sudden pressure drop occurs,please check whether the element of fine filter have been damaged.
无标题文档

About Us

Copyright techtongda365.com All Rights Reserved