Process of Mug Transferring
Mug press is good for making promotion products, ad, gifts, and souvenirs for companies, shops and schools. Furthermore, it can help you to make a unique style mug of your family or any funny images. Perfect DIY gifts for Birthday or Festival. You can also sell the special designed mugs on eBay or your local.
1.Insert Photos

Insert your photos from your camera to the computer using our supplied card reader. (Refer to Video of Mug Press 1)

2.Design Images

Design images with our special software and templates.

We have a special software is designed to most people's needs, it is easy operated and can save you much time but it will supply you many good templates.

3.Ptint

Print mirror image on the sublimation paper using the printer with sublimation inks. Then use hair dryer for quickly drying.
4.Fully Dry Images

Fully dry the image with a hair dryer, then you can transfer the image on to the mug. Or else it will affect the quality of transferring.

5.Attach

Shear the image according to the mug¡¯s size, put it straight and attach to the mug. Then stick to the mug by high resistant adhesive tape. Prepare to put them into the machine.

Note: If using the normal adhesive tape, after heating, it will be hard to clear the adhesive cement that sticks to the mug.¡¡
6.Adjust Pressure

1)Take the mug enclosed with image into the machine, and also put a teflon sheet between the mug and the heating pad.

2)Tighten the handle. Turn the knob of the pole setting until to the right pressure. It mustn't be too tight, or the mug and machine may break; not too loose, or the transferred image will not be clear. After adjusting the pressure, shut the handle.

Don¡¯t switch on the power supply with no mug in, or the heating mat will be burnt.
7.Adjust Temperature and Time

1)Set temp indication (¨H or ¡æ),the max. working temp, heating time, heating ways (manual or automatic), etc.

2) After checking and confirming no errors, press ¡°RUN¡± key and then the machine will enter into the assessed working process and the time begins counting down.

3) When the time is up, it beeps to remind you that the mug pressing operation is finished.

Note: 1. Reference parameters: working temp (374¨H/190¡æ)

2. When pressing the mug, you¡¯d better heat the mug with 104¨H/40¡æ(or blow it with the hair dryer for a little while) before attaching the paper , as the inside of mug is usually wet, which will effect the printing quality.

8.Cooling

Turn off the power and then take out the mug. Don't put the mug aside, or else the upside of the image will come out vague and slack selvedge.

You should take some methods for the quickly cooling of the mug to guarantee the transferring quality. 1) Shaking it or using a hair dryer to guarantee the air flowing above the mug. 2) Adding some warm water in the mug can also speed up the heat dissipation.

9.Package

Put the transferred mug into the mug box and then do some packaging, which will make it more delicate, beautiful and charming.