902C Thermistor-based Digital Thermometer

Thermistor digitals generally have "built in" probes and sensors. They must be calibrated during the manufacturing process and so are not interchangeable. Thermocouple digitals, with some exceptions, can accept any matching category of probe (the two most common are K-type and T-type--these have different temperature ranges).

The thermistor digitals are limited to the type of built-in probe they come with, and if the probe breaks, you have to buy a new thermometer. The 902C Thermistor-based Digital Thermometer can only accept K-type (NiCr-NiAL).

Features

  • LSI line and high quality components guarantee HI-REL and durability
  • High accuracy and wide range of applications
  • Compact instructions, small weight and easy operation

Parameters

  • Sensor Model: K Couple £¨NiCr-NiAL£©
  • Battery Life: 150-200 hours under 10mW consumption
  • Size: 0.99¡±x2.76¡±x4.1¡± (25x70x105mm)
  • Weight (including battery): 0.4Lb (180g)
  • Temp of Operating Environment: 32¨H¡ª104¨H £¨0¡æ¡ª40¡æ£©
  • Temp of Store Environment: -50¨H¡ª122¨H (-10¡æ¡ª50¡æ)
  • Measurement Range: -122¨H¡ª2372¨H£¨-50¡æ¡ª1300¡æ£©
Illustrated Instructions

Notes

  • Pay attention to "+" and "-" of the built-in probe.
  • It will shows LOBAT when it's below 7 voltage. Then you should change a 6F229V battery or a similar type to guarantee its normal work.