006332 universal screen frame up and dowm handle

In the process of screen printing, lifting and falling the frame are directly holding the edge of the frame, sometimes resulting in ink smacking problems, especially in screen frame material about 20 mm, print pallet is too big, screen plate smaller than printing pallet, when lifting the screen plate ,it is difficult to grab because of the small material. Using this kind handle can effectively solve these problems, installing the handle is convenient, quick and easy to lift and fall the frame.

Installing the handle will not damage the mesh and frame.

The frame handle can be directly clamped in any position of the frame, and it is suitable for the frame material 35* 40mm maximum, 20* 20mm minimum in various aluminum alloy, iron, wood frame.

Two installation methods, it can be installed in the upper part of the screen frame, and it also can be installed on the side of the frame.

Red handle on the upper side and front of the screen plate to fix the screen plate, ensure that the screen plate firmly fixed on the handle