Cutting Mat

With the help of this cutting mat,you can cut almost everything which is single layer.To avoid the paper moving during work, it’s better to use the cutting mat when cut normal material without backing paper. And the material should be sticking on the mat. The material size should be smaller than the Cutting mat.

Cutting Mat Reusing Method

After the cutting mat is used several times, the surface becomes non-sticky, and you should wash it before use, after cleaned, the cutting mat will be re-sticky. If the cutting mat is not sticky completely or not sticky enough, you should make use of the bedplate adhesive.

1. Before use, you should wash and clean the cutting mat with a brush.

2. After cleaned, the cutting mat should be dried in the air, and it will be re-sticky.

3. If the cutting mat is still not sticky, please spread on the cutting mat a layer of bedplate adhesive on the end of cutting mat.

4. Then scraping the bedplate adhesive from one end to the other end of the cutting mat using a squeegee.

5. Make sure the bedplate adhesive evenly on the cutting mat.

6. Dry the cutting mat in the air, and then stick the material to be cut on the cutting mat, and smoothing it out.

7. Put the cutting mat into the cutting plotter to cut.

More details information about bedplate adhesive/Pallet Adhesive (item code:008450), please see this link:
https://buyyou.net/asc365_Canada/Canada/Webpage/index.asp?ID=WW00015