|
CO2 Laser Engraving Machine with Clamp |
The Computerized Mini Laser Engraving
and Cutting Machine is equipped with one 40W water cooling laser tube,
high precise stepping motors, high quality control board.This machine
employs an USB port and thus can be connected to your laptop or desktop.
By the support of included software,this machine can work
well with multiple graphic formats including EMF/JPG/PLT/WMF.
Main Features
|
¢
Certification (FDA, CE, ISO9001)
¢ USB Port to Computer ¢ CorelDRAW LASER-Software. Easy to use.MoshiDraw Software Included
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Explanation of the
control panel : current regulation: using this button to adjust the electric current output. Current Indication: mA : refers to actual output electric currnet of the engraver Laser switch: After pressing the button ,the laser switch be pressed before each engrave ,otherwise the laser will not shine. Test switch: Only available for checking . Switchboard : Master switch for controlling engraver. |
 |
Parallel digital port : At
right side of the engraver , the port will connect relevant port
on the computer through printing cable . Switchboard port : At right hinder of the engraver (5A) ,close to the switch port , safety coefficient of the machine can be guaranteed . Water-cooling pipe port : It is for the circulation of cooling water . To lengthen the service life of the laser tube , purified water is to promoted . Fan port : At the hinder of the engraver and used for the installation of exhaust fan . The fan must be correctly installed for the cleanness of the machine . |
Application
|
Acrylic is the most popular material to engrave using a laser system. It engraves and cuts very easily, comes in a wide variety of shapes and sizes, and can be relatively inexpensive. Acrylic comes in two forms, cast and extruded. Cast acrylic is used for almost
all engraving purposes. This is because the frost produced
provides a nice white contrast against the clear material.
|
|
  |
|
Double-color Plate Engraving
Wood Laser Engraving
|
Wood
engraving has been used widely in our life.
it is very easy using the laser to produce sophisticated inlay work on wood, mother-of-pearl or even plastic. Veneers may be cut to size with special accuracy using the laser. The great advantage lies in the precision of the cut parts and also the controllability of the CAD or graphics programs. Positive and negative parts may be cut in very thin materials without correcting the cutting width. |
 |
|
Mylar Airbrush Stencil Material Engraving
| It's a kind of substrates to be cut by cutting plotter to form all kinds of figures and graph. The stencils are reusable, it can be used for T-shirt, wall, artwork, human body, and automotive applications. It is made of Mylar. |
|
| This rubber plate is made of
two layers ofnatural rubber, can be cut by laser engraver to
make stamp for commercial andpersonal use, especial for printing
factory to print cartons and other packageboxes.
|
 |
 |
 |
 |
Non-woven Fabric Engraving
| Non-woven fabric is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment. The term is used in the textile manufacturing industry to denote fabrics, such as felt, which are neither woven nor knitted. Nonwoven materials typically lack strength unless densified or reinforced by a backing. In recent years, nonwovens have become an alternative to polyurethane foam. |
|
Red Rubber Stamp Material Engraving
| Rubber stamping is
quite simply the process of transferring and replicating an
image. Using a variety of inks and other mediums, the image on the stamp can be transferred onto a huge range of objects, transforming the ordinary into something special. Rubber stamps have been used widely now,our laser engraving machine can make a wonderful rubber stamp,which maybe start your new business. Pay attention: Please set up mirror image when carving patterns. |
 |
