Wireless Distance Without Electronic Handwheel

The MACH3 Remote instructions

For the MACH3 systems

Model：

WHB04-S:40 meters wireless distance without electronic handwheel
WHB04-L:40 meters wireless distance with electronic handwheel
LHB04:With 5 m USB cable with electronic handwheel

WHB04-L
40meters

We have other two models, if you have any need ,please contact us

Description:

。The RF is Standard with 2.4G ISM ,the Tx power is 0DB and the RX sensitivity is -98DB
。The RF has 64 channels,the channel gap is 1Mhz
。The protocol Designed with high performance； Low power consumption；Automatic learning ID Number
。To jump frequency Adaptively when noised ,which can work with 2.4G wireless Mic ,Wlan and Bluetooth etc. devices.
。Has the function of the hand wheel, 100PPR the manual pulse generator output
。Display, real-time display of the machine the workpiece coordinates, mechanical coordinates. Coordinates X, Y, and Z three-axis with the screen display

Shuttle Pro Installation:

1:When Mach3 is installed , there will be a folder created named “PlugIns” in the Mach3 folder. This folder is the location to put and Plugin files that you want Mach3 to know about. Place
　　“ShuttlePro.dll” in the \Mach3\PlugIns folder. Check and make sure it is there.

2:Setup diver for Probe Z surface function；M930.m1s copy the installation directory to the
　　MACH3 ..\Mach3\macros\Mach3Mill

3:Now that the ShuttlePro.dll file is in \Mach3\PlugIns, the next step is to connect the huttlePro. If you are certain that your ShuttlePro is working and your hardware is working then you can simply plug in the ShuttlePro to one of the USB ports.

4:Once the ShuttlePro is connected, start Mach3 and go to the “Config” menu choice and select “ConfigPlugins”. You should see the ShuttlePro choice with a green checkmark in front of it. If it is not checked, you can check it. The checkmark means that Mach3 found the ShuttlePro on tartup. Click the “CONFIG” in yellow and set the buttons as you wish.

5:Once you have the proper button selected in the Mach3 ShuttlePro Plugin CONFIG menu, your Shuttle device should be working properly.

Choice ShuttlePro- FOR-MACH3

The product specific instruction link ，click here for details.

The MACH3 handwheel key function

Icon	Function	Icon	Function
	Reset		Stop
	Go to zero		Start/pause program
	return to the program start		Probe Z surface
	Spindle On/off		coordinate Divided by 2；Determine the coordinates X, Y, Z, A-axis through the position of the band switch。
	coordinate Clear；Determine the coordinates X, Y, Z, A-axis through the position of the band switch
	go to Z safehigh		Go home
	Step cycle regulation		And JOG work to MPG mode
	Macro-code		Macro-code
	Macro-code		Macro-code
	Macro-code

LCD display instructions

We are professional CNC sellers,if you need machine and related accessories, please feel free to contact with us.

Item included：

017230 CNC Wireless Pendant Handwheel