|
Common problems and solutions on glue machine:
1: the glue is not uniform, the glue sticks to parallel with the middle
of the gap on the rollers, you use a wallpaper thickness (according to
the amount of glue on adjusting the size of the gap size itself)
2: the meter is not zero: first press the meter zero button, and then
gently rotating the handle, you can reset. Return to zero after the
clearance of the zero button to drop into the appropriate sewing machine
oil, you can solve the problem of meter meter does not return to zero.
3: roller beating, paper glue not walk, while more while less basic
reason, is too much on cots and roller direct accumulation of glue, it
will cause the glue roller beating, paper glue does not go, while more
while less, then we are still adjusting the amount of glue, glue not
much, glue dense to control as much as possible, and a little thin, take
on a little, a lot of problems smoothly done or easily solved.
4: it is strictly prohibited to put on the pressure roller.
5: roller pressure roller on glue is strictly prohibited direct pressure
to the above, the middle pad of a 53 or 70 cm wide wallpaper, so it can
avoid the corrosion of glue on rollers.
6: when the machine does not need to use water to wash clean, in
addition to the stainless steel plastic tank and on both sides of the
wall, and the rest, to use oil to wipe it again, you can extend the life
of the machine |
