Desktop UV Coating Machine Laminator

Extrusion Coating and lamination are industrial processes that enable to produce a melt of thermoplastic polymer material.
When it is coated as a thin layer onto a moving substrate, the process is known as ¡°Extrusion Coating¡±. When it is used as a ¡°glue¡± to combine substrates, it is known as ¡°Extrusion Lamination¡±.

Coating use chemical liquid film. With this machine, UV coating liquid will adhesive evenly on photos. When protect film becomes dry by UV light, photos become waterproof ,damp-proof, anti-aging, anti-ultraviolet, strongly adhesive, hand wearing and anti-scrapping.
The greatest advantage is that the UV coating machine can save a lot of money, the thickness of coating is slight, no need more UV coating liquid and it is not prone to fail such as cold laminating, and more transparent than cold and hot laminating. Specially suitable for photo studios to use, due to bulk laminating . It will replace the traditional cold and hot laminating techniques to a great extent.

Parameters:
Coating Speed 100"(250cm)/Per minute 
Max Coating Width 13" ( 330mm)
Coating Thickness: 0.008"-0.004'(0.2mm-1mm)
Consumption: 5ml/m² ; 150-200m²/KG
Coating Cost US$0.02/Per Letter or A4 size paper
Power Consumption 1200W
Power Supply 220V (with a 110V to 220V voltage transformer) ; 50HZ-60HZ
Lamp Span Life 800 Hours
Gross Machine Weight 100Lb (46kg)
Machine Dimensions: 26x25x15" (680mm¡Á640mm¡Á380mm)
Features:
  • It is convenient ,safe, cheap and energy-saving, and less UV harmless.
  • High transparency,20% improvement on the cold laminating.
  • Circulate film liquid, save cost.
  • Low laminating cost, only 1/10 of cold laminating.
  • Compact covering, no air bubble at all.
  • Even convey, laminating.
  • Unique convey chains ,no harm laminating surface.
  • Works cleanly, no need much maintenance.
  • Easy changing UV tube and other parts.
    •

This extrusion coater is specially made for beautiful and protecting laser, ink jet photo paper, coated paper, back adhesive paper or other stuff after being printed. It can protect photos, card, poster and so on from wearing, humidity, liquids, heat, UV, fading, and enhance appearance and extend storage life. (Notice: This machine can not coat for laser printer, but now we are developing a new one for laser printer. To be expected.)

FAQ:

Why this machine not fit for laser printer?

The reason: If you use such as Xerox or Konica Minolta digital printer, because the ink powder is too smooth to stick by the coating liquid, so the effect is not so well. To get perfect laminating effect, you need to pre-heat the printing paper up to 100 to 120 degrees Fahrenheit (37.8-48.9 degrees Celsius) by some heating machine before coating, then the ink powder could stick the coating liquid evenly, and the UV coating machine could work with the laser printing paper.¡¡

¡¡