Numerical control liquid
filling machine uses micro-computer to control the mini-pump on filling
time and the rotation motor so that the machine can fill the liquid
fluently and at high accuracy. It's widely used in medical , chemistry,
food, beverage, oil and cosmetics, etc. It's suitable for filling
low-viscous liquid without pellets.
Separated with the electric motor, the pump is made of a variety of
anti-corrosion material. There is no mechanical metal part or abrasion
inside the pump. The pump can stand the oil, heat, acid, alkali,
abrasion and chemical products. This pump integrates the advantage of
self-suck pump and chemical pump, so it can self suck, heat protect,
stable working and continuous idle or load operate for long time.
¡¡
Features£º
1.High quality single-chip control, high efficiency, low power
consumption.
2.Automatic counting, control the filling quantity effectively.
3.LCD display, touch screen panel is easy to operate.
4.High filling accuracy, precise volume.
5.Stable and long use life on product working performance.
6.Self-suck function, don't need to pour.
7.Pump can stand the acid and alkali.
8.Anti-dripping design.
9.Reasonable construction design, stainless steel shell
is strong and durable to use.
Technical
parameters£º
¡¡
Voltage:
220V (equiped
with transformaer which can be used for 110V )
Power:
30W
Max flow rate:
3.2L/min
Max suck distance:
2 meters
Repeat error:
<0.5%
Filling volume range:
2ml-3500ml
Anti-dripping function:
Available
Memory function
without electricity:
Available
Filling tube material:
Soft silicone tube
Filling nozzle diameter:
¦µ8mm
Speed parameter range:
1-9
Filling time range:
0.01-99.99s
Interval time range:
0.01-99.99s
Weight:
5.5kg
Machine size:
350*270*150(mm)
Package size:
400*380*200(mm)
Warranty:
1 year warranty
on machine
¡¡
Installation and operation
¡¡
1)Take the small filter (photo
1) out of the part, and install it below the feeding tube. Then
take the plastic filling nozzle out and install it in the
feeding tube (the triangle head connects the discharge tube).
Take out the filling- head stand and install it on the left of
the machine as photo 3 shows, put the filling head in the clip
and tighten it by socket wrench. Connect the pedal switch with
machine, and put the tube with filter below the liquid level
inside the storage tank. The position of tank should be lower
than the machine. Start to test the machine after all is ready.
(The filter should be installed for the intake, the pump should
not contain impurities or the pump will be blocked and the
pressure will be not enough for water to come out.)
2)Turn on the switch, the
LCD screen will show welcome words and the machine will be under standby
status after 3 seconds, (if the machine is under working status, other
buttons can't work, you need adjust the parameter after press the
¡°on/off¡± button to let the machine under pause status.) then press
¡°program-option¡± button, you can choose from 0-6. Choose program 0, you
can set the parameter by the four parameter-set keys. If you choose
program 1-6, you should long press the parameter-set key, you can't set
parameter until the shining cursor appears. Press the "parameter-set"
key to save the parameter after you finish the setting. Different
filling volume choose different program. As the machine can
automatically memorize the parameter, you don't need to repeat the
setting.
Speed parameter range:1-9
Filling time range:0.01-99.99s
Interval time range:0.01-99.99s
There are inching and automatic
filling, you can press the "Inching/Continuous" key to exchange. You
need to install a pedal switch if you choose the inching way, every
filling needs to press the pedal switch, and the interval time is
useless.
3)Measurement proofreading
Press "On/Off" button, the machine is under working status (light on),
you can hear the water pump is running, and observe if there's water
coming out from the nozzle. If the water can't come out for long time,
you can dismantle the nozzle and install it again after the water coming
out. If you choose the inching way for measurement proofreading, you can
use measuring glass or electronic scale to continuously adjust the
filling time and speed to meet the requirement. The normal work can be
carried out after the measurement proofreading is done.
This package included (070581):
1) 1
set Liquid Filling Machine 220V with components & tools
(070582)
2) 1 pc transformer 1000W (change 110V to 220V)
(070992)
