Vacuum Brake Bleeder Kit

This unit is designed for use as a vacuum brake or clutch bleeder. It uses compressed air between 70 psi (4.8 bar) to 170 psi (11.6 bar), for building vacuum in the tank. By attaching the proper adapter (brake tube) to the fluid outlet cover located on the top of the unit, the vacuum can be used to drain brake fluid from a hydraulic system such as the brake or clutch systems on an automobile. It can also be used to extract a variety of fluids from reservoirs including the master cylinder or those for power steering fluid.
An automatic refilled kit is included with this unit. It is conveniently designed for use with a standard bottle of brake fluid, to maintain an adequate fluid level in the master cylinder while the hydraulic system is bled. Instructions are included with the unit for its use.

 

Feature:
Working Pressure

70-170 PSI

Air inlet

1/4"

Tank Capacity

2.0 L

Bottle Capacity

11.0 L

Air Consumption

5 CFM
Shipping Weight 9.4LB(4.25Kg)
Package Size 20*17*12In£¨51*42*29cm£©

  

¡¡
WARNING:
1.Always read carefully and understand instructions prior to using this equipment
2.Brake fluid is highly corrosive. Please to wear gloves and approved safety goggles at all times, and prevent contact the fluid with painted surfaces.
3.Do not use the unit to extract highly inflammable liquids or with fluids at temperatures above 175¡ã Fahrenheit (80¡ã Celsius).
4.Consult and follow the vehicle manufacturer¡¯s recommended procedures when servicing any hydraulic system.
5.This unit is designed for vacuum use only, don¡¯t attempt to pressurize in it.
6.Do not store either the unit or suction tubes near or in areas of high temperatures, direct sunlight, rain or snow.
7.The unit must be instantly, drained, washed and cleaned after each use.
¡¡

Item Included:

one set of Vacuum Brake Bleeder Kit(120313)