Brand New 50W CO2 Laser Engraving Machine  Laser Tube
Laser tube is one of the essential  parts of laser equipments.This laser tube is compatible with the most of  popular laser engraver !
Power output(W)£º50
Wavelength:10600nm
  • Length£¨mm£©£º800
    • Cooling System: Water Cooling
    Triggering voltage(KV)£º22
    Operating voltage(KV)£º16
    Operating current(mA)£º0-20
    Outer diameter(mm)£º50
    Power stability: ¡À5%
    Water Cool
    Package including: 1x 50W laser tube
    You can't leave cooling water in laser tube after power off, it will freeze  at Cold areas.
    Optimum working water temperature is 15-35 degrees.  
    working lifetime up to 3000-4500 hours (According to the water temperature,  continuous workload, the use of laser intensity and other aspects to  determine)
    The Laser tube after generally work 3-4 hours should to pause for about 30  minutes.
    Low power can extend the life of the tube.
    Warranty time:3  monthes for proper using

    Attention:
    1.Please handle this tube carefully when you install or use it,it is easy to  get broken by human improper operation,like impact force,work without water  circulation,freezing crack.
    2.Please check the package in front of the deliverer before you sign the  items,if the package is damaged,please DO NOT sign for it and refuse to  accept,then notice us by phone or email,we will handle it.