5L Stainless steel pressure barrels for fluid dispensing


parameters:

Material: Carbon steel/Stainless Steel
Inner diameter:151mm
Inner depth:280mm
ladle body wall thickness:4mm
Ladle cover wall thickness:14mm
The maximum fluid pressure:8bar
Glue way: upper glue
Package Size:9.4*9.4*15.7"(24*24*40cm)
Weight: 22LB(10kg)

     

Working principle:

The working principle of the quantitative dispensing: First,pour the glue directly into the pressure barrel or Install the glue in plastic container, then put it in the barrel. Then insert the pressure barrel into compressed air , the glue pressured out from the extruding pipe to the dispensing valve. The dispensing controller will control the open and close of the glue. By the timer control the time of every glue, quantitative out plastic to ensure that each volume glue is unanimous.

Details: