Stationary Host & Multi-function Pager
Wireless pager is a kind of realization of indoor wireless call, data transmission and alarm device, its construction is simple, easy to operate, widely used in leisure service establishments, factory production lines, airports, supermarkets, hospitals, nursing homes, families, etc. In general, the launcher of the coded information bearing signals, by the host or the control center receives and decoding the received information, through the way such as sound, light, electricity, etc.


Number display mode setting
1) Standby mode, press key [FUN] 3 seconds till [F1] appears on the screen.
2) Use key [UP] to choose [F8].
3) Press key [ENT] and [01] appears.
4) Use key [UP], [MOVE], or [DOWN] to choose a number. 01~10 is all-digital display (default setting), and 11~20 is digits beginning with an English letter ( A,B,C,D,E,F,H,P,J or L) display.
5) Press key [ENT] and [F8] appears on the screen.
6) Press key [ESC], back to standby mode. Done.

Call button registering
1) Standby mode, press key [FUN] 3 seconds till[F1] appears on the screen.
2) Press key [ENT], [01] [001] or [001-01] appears
3) Press key [UP], [[MOVE]] or [DOWN] to choose the register number wanted.
4) Press the call button to be registered, the register number flashes on the screen with music prompt and then stops.
5)  Press key [ESC], and [F1] appears.
6)  Press key [ESC] again, back to standby mode. The registration is finished.
7) Repeat step 3£©~4£©to register all the call buttons you need, and then press key [ESC] twice back to standby mode. Done.