Glasses Drilling Machine

1.First set center position of pupil distance on the spectacles holder, take down the gasket and perforate on the perforator, aim to align the center of pupil distance and coordinate center of perforator.

2.Press the handle and drill on the gasket, but please do not drill quickly one time.

3.Take the drilled gasket to edge on the lens edger( some frames are very thin, please use the spare steel disc to avoid deformation.)

4.While drilling, you should drill on the lens slowly, otherwise the flotsam of the lens will be sticked around the driller. Please clean the driller before using next time.

5.You must replace the driller if the plastic flotsam stuck on the driller which can not be cleaned.