Automatic Wire Stripper
Adjust distance between blades and shaft in accordance with the cable size(the insulating layer stripped but not hurt the inner conductor)
Feeding: strip the cables through feeding hole( you can adjust the feeding hole according cable size to the proper position which cables can enter into but not swing)
Stripping: (hand operated) rotate hand crank in order to peeling, if can¡¯t peel:
1¡¢too small wire diameter
2¡¢the blades center not in line with groove center( adjust the blades core)
3¡¢blades edge is too dull( sharpen the blades)
Notice: don¡¯t input your hands into the machine in any circumstance.
| 1 | Plastic regulating nut |
| 2 | Blades regulating nut |
| 3 | Motor |
| 4 | Feeding panel |
| 5 | Feeding panel |
| 6 | Feeding hole |
| 7 | Reducer casing |
| 8 | Shaft |
| 9 | Blades |
| 10 | Switch |
| Wire range | ¦µ1.5mm~ 25mm(¦µ0.059"~ 0.98") |
| Power | 0.18kw |
| Voltage | 110v |
| Weight | 13kg(28.67lbs) |
| Size | 240*320*320MM(9.45"*12.6"*12.6) |
