Popcorn Machine
Main unit has 3 function switches:spot light&warmer,stirrer,pot heater.
Hook the stainless steel pot onto the hanger of the main unit(Note:Roller bar should be on the door side and also check if gears between pot and ceiling are perfectly matched)
Plug in the power cord(hanging from the main unit ceiling)into the bottom of the stainless steel pot.
Switch the light and heater to ON.Popping pot should be pre-heated for 3-5minutes.Cut off top of oil section on pouch and squeeze oil into pot.Allow a few minutes to melt oil.If using other suitable ingredients,have pre-measured portions ready in advance.Add oil.(Max,15G/48oz.oil)
Switch the stirrer to ON so that it starts stirring.
Close the door on the main unit carefully
When popping stops (no more popping sound from pot),switch the stirrer and heater to OFF,popping is completed.Rotate the roller bar on the post and pour out all remaining popcorn.Gently shake if necessary.
Heater switch must remain OFF if the unit is not popping.Only the spot light warmer should be left ON,this will keep the popcorn warm,dry and tasty for a longer period of time.
Serve popcorn with scoop provided,Note:do not add butte or other liquid flavoring in main unit popcorn bin.Avoid a big mess.Remove popcorn to suitable serving bowl or popcorn
Before adding this type of flavoring.
Always remove plug from power supply before cleaning and of the unit is not being used for a period time.
