Solder Tools
Electric Soldering Iron
Electric soldering iron uses the advanced optimization design and meticulously product.The handle is made of new high-strength and heat-resistant material,and it's also with high-quality and durable heating element.The iron has the festure of safe, beautiful look and lightweight.So it becomes more and more popular.
Specifications:
| Name | Electric Soldering Iron |
| Power | 40w |
| Voltage | 110V |
| Length | 23cm (9") |
Note:
The first time using the new electric iron, is powered by hot child may
appear , it's normal to have slight smoke which is because of electric
heating element electrified ,and it will disappear later.
Electric iron should be kept dry, and never using after wet or rained.
Please check the voltage before using it.
¡¡
Soldering Smoke Absorber
Mount the CXG493 Soldering Smoke Absorber on this optional Arm Stand,and you have a powerful smoke absorber that can freely adjusted for maximum ease of using and optimum smoke absorption.Once the job is done,the unit can be quickly and easily swung to one side,where it will be out of the way but ready in an instant when needed for the next job.
CGX493 is a newly developed product which is a high performance fan and an activated carbon filter designed to absorb flux and lead fumes.
Specifications:
| Name | CGX493 Soldering Smoke Absorber |
| Power Consumption | 16W(50Hz)/14W(60Hz) |
| Outer Dimensions | 220*270*168mm(8.7"*10.6"*6.6") |
| Weight | 1500g (3.3lbs) |
Open the Filter Guider,and install the Activated Carbon Filter.Then close the Filter Guide.
Loose the Knob and adjust the angle.
Replace the Filter
Under normal operating conditions,the filter should
be replaced once a month since absorption capacity decline.
The filter may also need replacement when the dust adhere.(Never allow
the filter to become wet.)
Activated-Carbon Filter Specifications:
| Size | 130*130*10mm(5.1"*5.1"*0.4") |
| Amount of Activated-Carbon Filter | 7g (0.02lb) |
| Max.absorbing weight of noxious components per filer | 2g (0.004lb) |
Hot Glue Gun and Glue Stick
Features:
1¡¢The product can be applied to the glue stick which is
10mm(0.4")diameter.
2¡¢The glue stick is inserted into the end of glue gun until is inside.
Plugging in and preheating 5-8 minutes.Pulling the trigger to extruded
sol, and can control the volume.
3¡¢During the using,it's not necessary to remove the glue stickif you
can't use up it.Next time,it can be used directly after preheating 5-8
minutes.
Specifications:
| Name | Hot Glue Gun |
| Power | 40w |
| Length | 130mm (5") |
Digital Multimeter and Digital Electrical Tester Pen
Specifications:
| Name | DT9205A Digital Multimeter |
| DC Voltage | 200mV-1000V ¡À(0.5£¥+1) |
| AC Voltage | 200mV-750V ¡À(0.8£¥+3) |
| DC Current | 20mA-20A ¡À(0.8£¥+1) |
| AC Current | 20mA-20A ¡À(1£¥+3) |
| Resistance | 200¦¸£2000M¦¸ ¡À(2.5£¥+3) |
| Capacitance | 2nF-200¦ÌF |
¡¡
Digital electrical tester pen is a kind of tester pen, which belongs to electrical and electronic tools,and is used to test whether charged in the electric wire.This tester pen body is with LED display,you can read the tested voltage directly.
Specifications:
| Name | Digital Electrical Tester Pen |
| Voltage | 12-250V£¨AC\DC£© |
Anti-static Tweezers and Solder Sucker
ESD-11:Longer than ESD-10,appling to precision electronic parts operation.
ESD-12(high elasticity):The tweezers tip is stronger than standard's.It won't bend during clipping board with strong force and the parts won't fall.
ESD-13 (round):Avoiding to damage components and appling to take out chip.
ESD-14(fine):The tweezers tip is extra-fine and sharp,appling to high-density integrated circuit chip operation.
ESD-15:The tweezers tip is curved,appling to take out components in narrow place.
¡¡
Solder Sucker is made of aluminum.It is easy to carry and operate.
Component Package
|
Diode Package |
||
|
8 kinds, total 100 pcs |
||
|
1N4148 25pcs |
1N4007 25pcs |
1N5819 10pcs |
|
1N5399 10pcs |
FR107 10pcs |
FR207 10pcs |
|
1N5822 5pcs |
1N5408 5pcs |
¡¡ |
|
Ceramic Capacitor Package |
||
| 24 kinds, 10pcs in each kind | ||
| 6P | 10P | 18P |
| 20P | 22P | 25P |
| 30P | 33P | 47P |
| 68P | 101P | 221P |
| 331P | 471P | 681P |
| 102P | 222P | 332P |
| 472P | 103P | 223P |
| 333P | 473P | 104P |
|
Resistor Package |
||
| 25 kinds, 20 pcs in each kind | ||
| 10 | 47 | 100 |
| 200 | 330 | 470 |
| 680 | 1K | 1.5K |
| 2K | 3.3K | 4.7K |
| 6.8K | 10K | 15K |
| 20K | 33K | 47K |
| 68K | 100K | 150K |
| 330K | 470K | 1M 2M |
|
Adjustable Resistor Package |
||
| 9kinds, 5 pcs in each kind | ||
| 100(101) | 500(501) | 1K(102) |
| 5K(502) | 10K(103) | 50K(503) |
| 100K(104) | 500K(504) | 1M(105) |
|
Electrolytic Capacitor Package |
||
| 12 kinds, 10 pcs in each kind | ||
| 0.1UF/50V | 1UF/50V | 3.3UF/50V |
| 4.7UF/50V | 10UF/25V | 22UF/25V |
| 33UF/25V | 47UF/25V | 100UF/25V |
| 220UF/25V | 330UF/25V | 470UF/25V |
|
XTL Package |
||
| 10 kinds, 3 pcs in each kind | ||
| 6MHZ | 8MHZ | 11.0592MHZ |
| 12MHZ | 16MHZ | 22.1184MHZ |
| 20MHZ | 24MHZ | 32.768KHZ |
| 48MHZ | ¡¡ | ¡¡ |
|
Audion Package |
||
| 11 kinds, 10 pcs in each kind | ||
| S9012 | S9013 | S9014 |
| S9015 | S9018 | 2N3904 |
| 2N3906 | 2N5551 | 2N5401 |
| S8050 | S8550 | ¡¡ |
Universal Circuit Board
specifications:
1¡¢There is two bonding pads on both sides,and it can be welded components on both sides.
2¡¢The thickness of the circuit boards is 1.6mm£¨0.06"),and is in good material.
3¡¢Single hole, the distance between two holes is 2.54mm(0.1"), and the diameter is 0.95mm(0.04") .
4¡¢The bonding pad which both sides of one hole is connected
