1000ml Vertical Pneumatic Paste Cream Filling Machine
The pneumatic filling machine is specially designed by our factory for medium or small size enterprises, laboratory, hospital or beauty parlor in daily use chemical section. Its configuration is compact, acts agility and easy to use, all the parts which dip in the material are made of stainless steel and polytetrafluoroethylene.

Parameters:

Machine Type: LT-1000
Filling Head: 1

Filling Range:

100-1000ML
Capacity of Hopper 40Kg(88Lb)
Filling Bottle Height 12mm
Filling Speed: 1-25Pcs/Min
Machine Weight 45Kg(100Lb)
Exterior dimensions: 500x370x1580mm

กก
How to use

1.In the filter, adding two-thirds of the 20oil.

2.Gas source connected to adjust the filler so that the compressed air to reach 0.3-0.5MPA.

3.Will join the filling material inside the hopper

4.Auto switch, so that the feed material from the mouth, is a material Paste as can be expected from a one-way valve to open direct filling, and the come out materials to installed.

5.Adjustments required for a good filling, speed and time.

6.If the paste filling material, to maintain good material, the average hopper.
Maintenance:

1.Often have to filter the water out of

2.To maintain the oil filter

3.Material from the lower end of the piston and cylinder expected to wear the ring if there is to be replaced in a timely manner.

4.Filling materials can not be in all sorts of thing, otherwise they will be in error or damage caused by filling machines.

  

กก
Item Included:(181060)

1000ml Vertical Pneumatic Paste Cream Filling Machine