The machine is the 10 gallons with the best quality and reasonable price.
| Air consumption | 0.17-0.7m3/MIN |
| Container capacity | 25L |
| Power | 4HP |
| Working pressure | 60-125PSI,6-25feet3/MIN |
| Blasting nozzle | 2mm,2.5mm,3mm.3.5mm |
1, The sanding strength of compression type design is 30% more than than siphon sandblasting machine.
2, suitable for large work which is static and their surface treatment
3, Adopting pressing type sand blast, suitable for high density sand surface treatment requirements
4, with air/water separator, standard for higher sand requirements
5, Movable caster design, more convenient for working.
6, with the bottom valve, sand volume can be adjusted freely.
¡¡
Warning:
1. the work should be done before personal
protective work
2. can not use higher than work pressure
3. use clean abrasive, prevent gun jams
4. the container pressure should be discharged to zero after the work.
¡¡
1.Equipped with 4 ceramic nozzles and closing valves.
2.Pressure Gauge.
3.Sand tube.
4.Fill Funnel.
5.Gas/water separator.
6.Rubber wheel and canvas mask.
