Hydraulic Pressure Test Kit Test 新建网页 1 新建网页 1 新建网页 2 新建网页 1

Hot Air Plastic Hand Extrusion Welder Gun  

                     Used for HDPE,PP,PVDF, especially PE can show the characteristic best

Specification:

Hot Air Plastic Hand Extrusion Welder Gun
Voltage 220V
Drive motor　 800W
1020W
Heat blast 1600W
3400W
Air volume

500L/min
Wind temperature

20-600℃
Heating temperature when extruding 300—400℃
Diameter of welding rod φ3.0mm/4.0mm
Packaging 1 case
G. W.:44.1 lbs
Ctn  size: 18.1*24.4*7.1inches
Application:
1.Thermoplastic plastic HDPE,PP,PVDF, especially PE can show the characteristic best.
2.It is forbidden to use for electric conduction plastic (PE-EL), which can bring electric conduction short circuit of machine.
3.It can once weld the line with width of more than 10mm and plastic board with 40mm below.
4.This machine is used for the fourth part of the barrel bath and the tub and accords to the standard of the DVS(Germany Welding Association)

Item Included:

  • 1    Plastic extrusion Welding machine      (202121)