|
Electric knife Sharpener |
|||||||||||||
|
Keep a razor-sharp edge on a variety of tools with this
full-service water-cooled system. This machine uses jigs to guide your
tools so that only minute fractions of steel are removed at each
sharpening. It takes less time and extends the life of your tools. The
slow-speed always stays in
harmony with the steel tool-meaning the edge will not overheat and lose
its hardness. And to finish the process, a leather honing wheel lets you
polish the edge to a wood-sheering sharpness.
|
|||||||||||||
|
|
 |
||||||||||||
| Feature:
|
|||||||||||||
| 1.Fast Deburring 2.Dry Wheel Fast Grinding 3.Wet Wheel Blade Sharpening 4.Blade Sharpening 5.Sharpening Angle Seting With Miter Gauge 6.Table Bevel Fixing & Mitre Gauge For Precise Cutting |
|||||||||||||
| Specification: |
|||||||||||||
| Model | SCM8100 | ||||||||||||
| Motor | hp | 1/4 | |||||||||||
| w | 200 | ||||||||||||
| Rotate speed | -50Hz | 1425 | |||||||||||
| -60Hz | 1725 | ||||||||||||
| Grinding wheel diameter of axle | in | 1/2" | |||||||||||
| mm | 12.7 | ||||||||||||
| Grinding wheel size | in | 10"*2"/8"*1-1/7" | |||||||||||
| mm | 250*50/200*30 | ||||||||||||
| Grinding fineness | L/R | 220# | |||||||||||
| Cooling Bath | YES | ||||||||||||
| Machine size | cm | 24*33*42 | |||||||||||
| Machine weight | kg | 17.5 | |||||||||||
| Notice:
Before using machine must take out the plastic foam.
|
 |
||||||||||||
| Item Included:
|
|||||||||||||
