Digital Conductivity Salinity Benchtop Meter

¡¡

-Automatic buffer recognition to avoid errors during calibration .

-Maximum 5 points calibration for pH benchtop meters .

-Hold function to freeze the record .

-Max./Min. review of memorized data.

-Reliable and replaceable probe with temp. compensation.

-Convenient to view calibration information of probe .

-"Ready" icon on LCD to indicate the reading is stable or not.

-99 memories and could be downloaded to PC for analysis .

-Automatic or manual temp. compensation are allowed .

-Operation RH%: up to 95% without condensation

-Storage Temperature: -20~60 ¡æ£¨-4~140¨H£©

-Storage RH%: up to 95% without condensation

-Size:8.5*6.6*2.3In(21.7x16.8x5.8cm) (LxWxT)

-Weight: 86505:Approx.0.3Lbs(137g) (meter only)

-Thermo Paper Roll: 57mm x 20M x 40@

-PH Range:0.00-14.00

2.Connect with an adaptor from AC power source to the power jack. Slide in the adaptor jack of the adaptor into the meter, make sure it is firmly seated. The meter¡¯s voltage is 9V.

3.For PH and ORP measurement, connect a sensor electrode to the BNC port. For Cond. TDS and Salinity measurement, connect a sensor electrode to the MIC port.

4.For PH probe with temperature sensor, connect a temperature sensor connector to port.

5.Connect RS232 cable to meter and computer if you intend to upload real time measurement values and memories to computer for further analysis.

¡¡