Diesel Injector Nozzle Tester Pop Pressure Teste

Specification

It is used to adjust and calibrate the injecting pressure,atomizing  quality,injecting angle and needle valve seals of nozzle of diesel engine in order to ensure excellent power and economic performance of diesel engine.

Operation and adjustment of the nozzle tester

1.Fix the tester on stable work-table by using four hole of the base plat.

2. Working environment must be clean, so must operator¡¯s hands and clothes must be clean.No operating out of the room is allowed.

3. Precipitate light-10 diesel over hours,Filter it through strainer,then put the filtered diesel into tank.Don¡¯t put into it with unqualified diesel.

4.Testing of injection pressure of injector assembly.

5. Adjustment of injecting angle.Test the injecting angle actor the injecting pressure is adjusted.Put a piece of white paper or a piece of iron-wire net painted with grease wider the nozzle in the distance H