Butterfly Shape Hole Punching Machine

A ¡¢puncher to continue to work, at least once per hour to add the  lubricating oil or change new oil 

once, in order to make the punch  and  guide set keep lubricant.

B¡¢when using, punching machine for residual timely liquidation, especially lower die residue, clean

 up again after the boot.

C¡¢when using, note the punching machine without loosing or ound   abnormal phenomena, such

 as the discovery of issues, timely handling.

D¡¢found the punching machine position have offset, cannot use iron knock, can use to glue the 

hammer.

E¡¢suggest using pressure (the normal 4mpa)

A¡¢ and after use, first put the punching machine looks clean, especially to the punch and 

lowerdie parts wipe clean.

B¡¢on the punch and lower die parts add lubricating oil, will punch press to lowest position, 

in order to better protect the blade and lower die is not damaged.

1¡¢  when the punch using punching Down after pull don't?
A: checking air whether ample (normal pressure need 4mpa controlled)
2¡¢punching often pull bad plastic plastic bags?
A:  checking air whether ample or is low;
B:  check the stiletto signal system is normal or not
C:  check the punching machine and bag-making machine cutting knife whether synchronization;
D:  punch down the residence time of whether too long

3¡¢punching ups and downs (sometimes punching   
   blunt not)?
A: check whether solenoid water and whether work, muffler is blocked 
B: check the cylinder leaks,

4¡¢and rushed out of the hole bits cottony or constantly
A: in not dismantle the punch cases, with alloy file to grind lower  die not sharp position or 

punch grinding blade part number,  parallel outcast don't let remain in the above.

Item included:

Butterfly Shape Hole Punching Machine  (239013)

Local Pick Up & Service Center

Shipping & Handling Details

Return / Refund

If  you are not 100% happy with your purchase, please contact Us. Please  don't directly opened a request or case without informing us, or  else, we will do some discounts on the warranty and other  sales-services later on. Hope for your understanding.

Returns & Exchanges

¡ø All  returns must be made within 14 days of delivery date. Items must be  in new, unused condition, with all original materials included with  the shipment. A partial refund may be applied for opened or damaged  items, depending on the condition.
¡ø Items  returned under the buyer¡¯s remorse: The return shipping fee must be  covered by the buyer; The original shipping cost will also be  deducted from the refund. 15% restocking fee of the items purchase  price will be charged. 
¡ø Returns  that are the result of our seller's error: Buyer will receive a full  refund of the item as well as shipping charges
¡ø All  returns require a RA (Return Authorization) number that will be  given by our seller. Please contact with us at first for more  details.

Defective & Damaged  Products 

¡ø If  product was received damaged or not as described, please send us  some pictures or videos, so we could well understand your problem,  then solve them for you ASAP. Besides, it's much helpful for us to  claim with UPS, remind our related department to pay much more  attention to packaging later on. Hope for your understanding.
¡ø Replacement  or refund of defective or damaged products can only be returned in  exchange for the exact same product, or else, the purchase price  will be refunded back to your original payment method. 
¡ø If  an item is received damaged, customer service must be contacted  within 7 days of receiving your item. All returns require a RA  (Return Authorization) number as above.

Payment

Warranty & Feedback