|
The lensatic compass--also called a military compass--is a precision
instrument that when used with a topographical map can guide the
adventurous off marked trails into wilderness areas with confidence. The
lensatic compass is used to set course bearings, orient yourself to a
map and follow a course over land. Carrying and being able to navigate
with a map and lensatic compass is a good idea, even when you are
traveling with a GPS unit. Electronics do fail, so being able to get to
your destination safely with a map and compass is an invaluable skill.
1) Rugged metal case
2) Adjustable luminous marching line
3) Thumb hold and magnifying viewer
4) Sighting hairline
5) Ideal for locating positions on a map or in the field
6) Floating luminous dial
7) Excellent for hiking, camping and outdoor activities.
8) Folding size: 3.03*2.28*1.10in
Package Contents: 1X Military Style Lensatic Compass
Instructions for Lensatic compass:
Taking a Compass Bearing
Step1
Open the lensatic compass so that the cover is at a 90 degree angle and
the lens bracket is at a 30 degree angle to the case. Check to make sure
the dial is floating freely.
Step 2
Insert your thumb into the thumb loop.
Step 3
Hold the lensatic compass so it is resting on your thumb and bent index
finger.
Step 4
Raise the compass to eye level.
Step 5
Line up a distant object with the sight wire and the center of the
sighting groove in the lens bracket.
Step 6
Read the course bearing (azimuth) while keeping your head and compass
still. There are two sets of numbers; degrees are in red and mils are in
black.
Set a Course
Step 1
Open the lensatic compass completely.
Step 2
Place the compass on a level map with the azimuth directly under the
index line. If you want to follow a 90 degree bearing, put the 90 degree
mark under the index line.
Step 3
Hold the compass in this position and rotate the bezel until the
luminous indicator is over the north "N" arrow. The course is now set.
To check your course, open the compass and line up the luminous
indicator with the "N" arrow. Do not move the bezel.
Following a Course
Step 1
Open the lensatic compass with the cover at a 90 degree angle and the
lens bracket at a 30 degree angle to the case.
Step 2
Point the compass along the desired course bearing.
Step 3
Line up an easily identifiable object with the sighting groove and the
sighting wire.
Step 4
Keep this object in sight as you travel. |
