5" Air Angle Grinder

1.class pneumatic tools should be injected into the intake port before work 3-5 drops of pneumatic tool oil, and idling for 1-2 seconds, fully lubricate the internal parts.

2.the gas supply line must be installed valves, filters and oil mist, ensure the supply pressure is stable, clean and dry compressed air contains enough mist lubrication.

3.Do not vent toward yourself or around the operator.

4.regular checks of the trachea, if found loose or broken to be repaired or replaced.

5.do not touch the rotating part of the hand tool operation, and to prevent the clothes, accessories, hair, etc. is wound tools.

A:When to stop working

B:When replacing accessories (such as replacement wrench set, screwdriver bits, drill bits, grinding wheels, etc.)

C:found a failure or maintenance time

5" Air Angle Grinder