Hydraulic Air Foot Pump
Mainly to used for hydraulic equipment (high pressure) power, for steel structure adjust, corrected. Widely used in automobile construction, repair, machinery and equipment work force.
Specifications:
Type:NAP003

Air inlet thread:NPT1/4"-18

Out oil port thread:NPT3/8"-18

Available oil (L):1.6

Net weight (lb/kg):18.1/8.2

Item size (inch/cm):10.4*5.4*4.3/26.3*13.6*10.8

Input pressure (psi/Mpa):90-140/0.7

Output oil pressure (Mpa):¡Ý70

Housing Material: aluminum
Precautions:
When the high-pressure hydraulic system before operating the first device equipped with proper labor protection.
Do not load supported by the hydraulic system to stay below in order to avoid personal injury, operation, hands and feet to maintain a certain distance in cylinders and components. When the cylinder is used as a load lifting device, it should never be used as a load supporting means. After the load is lifting or fall, you must use a rigid object to support the load. Carefully select steel or wood can withstand the load to support the load, do not squeeze or lifting applications will use a hydraulic cylinder as the plate.
When lifting loads Never exceed the rated load of the fuel tank. Overloading will result in personal injury and damage to the equipment, the design of the cylinder pressure constant maximum value, do not use cylinder and jack connections at a higher pressure rating of the pump. After the load is lifting or fall, you must use a rigid object to support the load. Carefully select steel or wood can withstand the load to support the load, do not squeeze or lifting applications will use a hydraulic cylinder as the plate.
Never will be higher than the pump pressure relief valve setting of maximum pressure level set too high can lead to personal injury and equipment damage.
Do not touch the pressure in the hose, splash out of the oil pressure can penetrate the skin and cause serious injury, if there is pressure oil splashing intake skin see a doctor immediately.
Please double-check system for all connection points, must not use the fuel tank when the system is not fully connected to the fuel tank before use.
The maximum working pressure must not exceed the maximum pressure rating of the lowest pressure system components.
Hydraulic equipment away from open flames or hot area.
Before lifting load should ensure the stability of attachments. Cylinders should be placed on a load-bearing plane. In some applications, it can be used to improve the stability of the base cylinder fuel tank. Do not weld or otherwise change the way the bottom of the fuel tank reinforcement.
Item Include:
1 Set of Hydraulic Air Foot Pump 270030