Solvent emulsion for Plastisol, Discharge, Water Based, Solvent Based and UV inks. Physical Properties, Pink Colored,also available in Clear Virtually pinhole and ﬁsh eye free extremely durable for long print runs outstanding resolution and deﬁnition 42% solids
Handle under yellow safelight conditions.
Mix sensitizer according to the instructions on the bottle. Pour the solution into the emulsion and mix thoroughly. Let the emulsion stand for 2 hours to let the air bubbles release from the emulsion.
It is important to have a clean dry screen before you apply the emulsion. To achieve this use a good degreaser available.
Use a clean coating trough that has a smooth edge without nicks or burrs. Coating environment should be in a clean light safe area with 65% humidity level.
1. Apply one or two coats of emulsion to the print side.
2. Reverse the screen and apply one or two coats to the squeegee side.
To achieve user speciﬁc results, additional coats may be used.
Dry the screen in a horizontal position with the print side down in a clean dry room. Follow these guidelines to ensure
86˚ to 104˚ F (30˚ to 40˚ C)
30% to 50% relative humidity good air circulation
*To achieve the desired humidity levels the use of a dehumidiﬁer is recommended.
For best results use an exposure calculator to determine the exact exposure time. Proper exposure is determined by a
number of conditions such as clean ﬁlm positives, mesh color, emulsion type, emulsion thickness and exposure unit type.