Heat Transfer PU Vinyl

PU vinyl can be cut by a vinyl cutter to print name, number, logo and design on T-shirts, sports wear and other garments by a heat press. It is very durable, stretchable, washes fast and will last life of garments.35 colors are available,CDU-28 to CDU-33,these 6 colors have a special shining effect. CDU-34 toCDU-35 have a fluorescent effect.
  • PU material
  • Has a clear, thick ,high temperature resistant adhesive base layer that can hold cut-out image in place for easy transfer
  • Used for any type of cloth material including 100% cotton, 100% polyester and mixture of both
  • Very durable, stretchable
  • Width:20" (0.5m)
  • Made in Korea, high quality

Composition
Ingredients Weight%
Polyester film 60.7%
PU layer 13.1%
Polyester hot melt adhesive 26.2%

Instruction of ASC PU Transfer

1)Make target design by computers. Switch on the cutting plotter and better try the pressure of tool in the first step:
After cutting, the color layer as well as one layer of base paper can be easily removed at the same time.		 2)The tool should just cut half thickness of the base paper.
3)There are many colors of PU vinyl transfer you can choose. 4)Set the speed according to the size of the design. For example, set the speed faster (at 50-75) for a large design, and at 25definitely for a small one. Pressure is about 150g.Lowerspeed cutting is very important!
5)Peel off the unwanted color layer part when finish cutting. 6)The design on base paper should be complete without any deletion. If you peel the wanted parts ,you can press it back then continue.
7)Do not overly set the pressure of the heat-press-machine. Set the temperature at 150¡æ-175¡æ(310F-350F) and the time in 10 -15seconds.
The temperature & time is not absolute, You should adjust on actual status.		 8)Put the pattern on the printing stock properly and place Teflon sheet on top then medium heat press.
9)Cool peel the base paper. 10)A wanted design will be on your unique T-shirt completely.