MA + MB Emulsion Hardener

¡¡

Instructions

1. Mix the emulsion hardener of MA with MB at the ratio of 1:1. Prohibit using of metal containers.

2. Coat the mixed emulsion hardener even on the two sides of the stretched screen after two times of exposure.

3. Lay it aside for one minute to be fully soaked.

4. Clean away superfluous hardener with sponge or soft cloth. Or it will affect the quality of printing.

5. Drying for more than 30 minutes in a condition of 104F ¨C 140F (40¡æ ¨C 60¡æ). If it¡¯s not fully dried or the temperature is too low, it will affect the quality of printing as well.

Notes
 1. Please seal up and earlier use up after opening.
2. It is not suitable for screen mesh of stainless steel or nylon.
3. It is acid and with stimulating effect to skin. If it comes to the hand, just flush it; if it comes to eyes, go to see the doctor after promptly flushing. Please put on your protective gloves for safety.
4. It must be stored in a cool and dry place

Net Weight£º500ML + 500ML 

Guarantee Period: One Year