Using Notes and Print Settings

กก

Using Notes

Usages of printer with Continuous Ink Supply System and common printer are similar, just add some more notes.

• Regularly check whether the multi-channel tubes rub against top cover of the printer, the printer data cable, take the paper inside the printer and base friction, if the friction is minor, you can paste a bit parts in friction adhesive article.

• The fixed point of tubes on the printer panel or interior must be firmly fixed, during printing and ink box moving, do not drop off.

• Take care not to drop to the ground when moving ink container, you had better put the ink container on the exit bracket before moving, best cartridges on the printer first things out of paper pallet moving again, during long-distance transport CISS must be removed.

• Pay attention regularly to the remaining ink in the ink container, if the ink in the ink container reduces a lot in a few days or even overnight, you must immediately investigate the cause before using again.

• When the indicator on the panel of the printer which is installed a permanent chip flashes or the computer says "use up", but there are still inks in the ink cartridges, just operate again according to the steps for replacing the ink cartridge, or turn off the power a few minutes to restore ink . If the printer does not show the number of ink, but can print normally, it will not damage the printer.

• Don't worry nozzle cleaning. printing broken-line is a general failure, and cleaning nozzle is the best way, when using original ink cartridges could not bear to use the cleaning nozzle, and after installing CISS the cost of cleaning nozzle will reduce several times.

• Pay attention to the problem of waste ink in printer. After using CISS, not only the number of printing is on the increase, and the waste inks generated each cleaning also increase, because the printer ink cartridges are adequate long-term, after careful observation, the number of printing waste inks generated by nozzle cleaning with no sponge ink cartridges increases by 1 / 5 than sponge ink cartridges.

Printing Settings

• The print quality setting options: economic (high-speed and economical-ink printing), text (medium quality, and standard text printing), text and images (high-quality text and graphics printing), photo (high-quality photo printing), high-quality photo (higher quality photo printing), different printing requirements select different settings.

• Paper set: ordinary paper, matte, glossy paper, suitable for different types of paper.

• There is also color and color modes selected, it will affect the quality and effect of print.

Note: In sublimation process, it will be better to set "matte paper" and high-quality photo printing before printing sublimation papers.
กก