UV Coating Machine

Extrusion Coating and lamination are industrial processes that enable to produce a melt of thermoplastic polymer material.
When it is coated as a thin layer onto a moving substrate, the process is known as ¡°Extrusion Coating¡±. When it is used as a ¡°glue¡± to combine substrates, it is known as ¡°Extrusion Lamination¡±.

This extrusion coater is specially made for beautiful and protecting laser, ink jet photo paper, coated paper, back adhesive paper or other stuff after being printed . It can protect photos, card, poster and so on from wearing, humidity, liquids, heat, UV, fading, and enhance appearance and extend storage life. (Notice: This machine can not coat for laser printer, but now we are developing a new one for laser printer. To be expected.)

  • It is convenient ,safe, cheap and energy-saving, and less UV harmless.
  • High transparency,20% improvement on the cold laminating.
  • Low laminating cost, only 1/10 of cold laminating.
  • Compact covering, no air bubble at all.
  • Even convey, laminating.
  • Circulate film liquid, save cost.
  • Unique convey chains ,no harm laminating surface.
  • Works cleanly, no need much maintenance.
  • Easy changing UV tube and other parts.
  • User Manual
  • Laminating speed:39.4¡±/m(1000mm/min)
  • Laminating thickness:0.008"-0.004'(0.2mm-1mm)
  • Laminating width:0-14.17"(0-360mm)
  • Input voltage: 220V 50HZ-60HZ

  • Power : 450W

  • Consumption :5-10ml/©O

  • Net weight:100lb (45kg)
  • Package weight: 127.6lb (58kg)
  • Package size:31.89"*28.74"*20.47"(81*73*52cm)

¡¡

Notice:

1) This machine request that the paper must be flat and can endure the high temperature. It will not be curly when it is heated .

2) The thickness of the input medium should between 0.008¡± and 0.004¡±(0.2mm and 1mm).If it is less than 0008¡±,put a piece of paper under the medium and put them together into the glue roller.

3) The machine must work on horizontal platform.

4) The environment of the workplace should be clean and ventilated, and do not expose in the sunlight.

5) You must not turn on the UV light instantly when you just turn it off, do not start working until the UV tube is cool about 2 minutes.

6) The UV tube¡¯s lifetime is about 800-1000 hours. If the tube can not light and the film become sticky, it means the light tube¡¯s life come to the end and you should change it .