006377 Universal multicolor overprint screen printing micro adjust table

This micro adjust table is specially used for multi-color overprint screen printing machines without micro adjust device, such as various four-color four-station screen printing machine; Six color six station screen printing machine, eight color eight station screen printing machine (commonly known as octopus screen printing machine). This micro adjust table can be used for the M and A type four color four position and six color six position that produced by our company.

This micro adjust table only needs to be installed on a printing pallet, and all screen plates shall be calibrated on this pallet. After all is completed, color matching of all pallet shall be accurate. There is no need to match the color of each pallet. After color matching, you can remove the eight micro adjust knobs around the table. This table and other pallets can be printed in the same way. When color matching is needed, install the eight micro adjust knobs and use them.

This micro adjust table is equipped with eight knobs, two on each side, and the fixing plate with micro adjust knobs is installed on the back of the pallet. The micro adjust knob board is inserted into the fixed board, and the micro adjust knob board can be moved back and forth or left and right according to different screen frame sizes, so as to fit the micro adjust knob to micro adjust the screen plate.

Usage:

1. Install the fixing plate on the back of the pallet ( installation diagram shown in the manual is outside 450*550 mm T shirt pallet,other sizes can be adjusted according to the size of the pallet)

2.Install the screen frame on the clamp head and fix it tightly;

3. Insert the micro adjust knob board into the fixed boards, and adjust the distance of the knob head to 10mm according to the size of the screen frame. screw the hand screw under the micro adjust knob plate and fix it.

4.Print the fixed screen plate marking points on the pallet;

5.Remove the screen plate, move the next screen plate to this pallet, slightly loosen the knob of the clamp(the screen frame can be slightly moved). According to the marking points on the pallet, by micro adjusting eight micro adjust knobs , the marking on the screen plate and marking on the pallet are completely corresponding, and then tighten the handle of the screen frame, the micro adjust of the screen plate is completed. The completion of other micro adjust screen plate.

6.After all the screen plate is adjusted, other pallets do not need to micro adjust .

7.Loosen the handle under the micro adjust knob board, take out the knob board and print.

The fixed board of the table can be directly fixed on the wooden table plate with self-tapping; As for pallet made of aluminum or other materials, user can use double-sided adhesive or the appropriate glue paste on the back of the pallet.