006440---N411Z desktop micro-adjust four color one station overprinting screen printing machine

It is mainly used for the four color T-shirt overprinting,it is configured with one t-shirt pallet station;The machine should be fixed on the table.

This machine has micro-adjust knobs to move screen plate to position the color for overprinting.

The functions and characters :

1,The chuck of the screen frame can rotate at 360 degree.

2,Each screen frame arm is installed with 3 knobs to fine-tune the screen plate, screen plate directly fixed on the clamp, loosen the upper two fixed handle on thepallet arm ,  adjusting the screen frame back and forward, left and right within 15 mm by the three fine-tuning knobs. When the screen plate color alignment is finished, the upper two fixed handle on the pallet arm can be tightened.

3,Each screen frame’s fixing device is equipped wth precise positioning wheel,when the positioning iron on the arm placed in positioning wheel closely, it can ensure the printing precision .

4,Each screen frame’s fixing device is equipped wth big lock wheel, screen frame arm can easily fall into the metal positioning wheel when touch the two big lock wheels ,and it also can prevent the direct collision between the positioning iron and the metal positioning wheel .

5,Each screen frame’s fixing device is equipped wth adjustable height chuck positioning knobs and adjustable height knobs when lift up the acreen frame;

6,According to the weight of the screen frame, spring tension can be adjusted by the basket screws to achieve balance;

7,Screen frame chuck’s width is (10in) 25 cm ; It is suitable for screen frame with outside size within (24 in) 60 cm and screen frame with thickness size is within 4 cm (1.6 in) ;

8,Screen frame chuck can be adjusted up to 5 cm (2 in)according to the height of substrates;

9,Screen frame chuck knob fix the screen frame together with the special aluminum alloy plate, and it can be fit closely and be more stable;

10,The pallet is connected with the pallet arm by braket, it can move around 10cm (4 in) from front to back .

11,T-shirt type pallet of the machine is 55 cm (22 in) long, 45 cm(18in) wide, the thickness is 1.8 cm (0.7 in); Using furniture surface melamine high density board, the surface with small pits, and it is more suitable for printing T-shirt when scraping the pallet glue.

12,This machine is combination structure, small size, and it is more suitable for transportation; According to the installation diagram and configuration installation tools can install the machine.

13,The machine adopts advanced electrostatic spraying process, various parts using stainless steel, aluminum alloy, nickel and zinc plating technology. They are corrosion resistance, no fading, easy to clean, maintain color and finish for a long time, and it can use for a long time with no rust.