1. Intelligent control timer: control instrument can stop the rotation of the platform from 1 to 999 seconds according to the needs of customer; Drying or curing time can be adjusted arbitrarily. After adjustment will be executed according to the setting. Turn on the machine again and it still run the same setting.

2. Plug in and turn the switch on, press the "+" and "-" buttons on the panel to set the exposing time. The far-infrared probe has been set before packing, no adjustment is required.

3. The platform is 16x16 inches steel plates : the surface of the steel plate platform is treated with high-temperature paint, and surface is fixed with PTFE cloth (PTFE cloth will resistant up to 300 degrees of high temperature, non-stick oil, abrasion resistance).

4. The steel plate can rotate automatically by 60 degree every time, and it can stop as the set time when rotated to the dryer oven or UV curing machine , after the time set up , the platform automatically rotate to the next dryer oven or UV curing machine, no needs of manual adjustment.

5. This machine idles 1 turn per minute, and the rotation position of adjacent platforms is 10 seconds.

The platform (excluding dryer or UV curing machine) is a circle with a diameter of 1.58 meters, covering an area of 2 square meters.

Voltage: 110

Power :1600W

Wave length:365nm

Pallet size: 16 x 16 in (40 x 40 cm)

Operation Method:

Turn on the dryer for 5 minutes. After reaching the basic temperature of the dryer, check the thermometer to display the temperature.

If the temperature cannot reach the required temperature, lower the dryer box and test again;
If the temperature is too high, the dryer box can be raised and tested again to reach the desired temperature.

Reference data:
Room temperature 24C (75F), no ventilation in the working environment, 5 minutes after turning on the dryer;

The temperature at the bottom of the drying box 3cm away from the platform is 180C (374F).
The temperature at the bottom of the drying box 5cm away from the platform is 170C (356F)
The temperature at the bottom of the drying box 7 cm away from the drying table is 160C (320F).