|
1600W Flash Dryer Heating Heads with sensor switch |
| This model
flash dryer is used to install with a screen printer. It could be
installed on the bottom base of a printer then you can rotate it above
your pallet and curing ink immediately. Saving time and cost.
|
|
Features 1600W carbon fiber heating element, normal working over 10000 hours. Drying box size: 15.7 x 15.7 inches (40c40cm) Moving up & down within 4 inches (10cm)
Test Data When the distance between dryer and shirt is 3cm, temperature is 180C (374F) When distance is 5cm, temperature is 170C (3256F) When distance is 7cm, temperature is 160C (320F)
Photoelectric sensor switch adjustment: 1. Switch on, move induction object, when detector sensing the object, display panel will shows "o" , it mean the distance is suitable and machine start to work. Taking away the object, flash dryer will shows "F' . If dryer do not stop automatically when the object leaving, please repeat this step to test a distance. 2. Machine will beeping 2-3 seconds when heating tube start / stop working. If operator do not have next step, it will beeping again and last 10 seconds.
Effect Picture * Only sell a flash dryer, do not include the screen printer ! |
|
|
Items
included
|
