Vertical Type Rotating Screen Mesh Storage Rack
This rack is mainly used for placing screen mesh rolls with paper tube. It can install 6-12 rolls on the upper part, and the semicircle part of the bottom can be placed about 20 rolls. This rack can be adjusted from left to right according to different width (min1.27-max1.65m). There are 6 brake casters installed at the bottom of the rack , it make sure the rack can be moved at any time . With this rack will keep the mesh clean/t in order and easy to clip. Easy operate and more convenient to use.
This rack could be used for storage/ display/retail sell or personal use.
Using method
According to the weight of different mesh size, each rack can install 6-12 rolls. Firstly, operator needs to confirm the rolls amount, then set the holder to suitable location, tighten the positioning screws of both sides then fix the round holder and all done.
If place the 1.63 meter width mesh, length of the tube is 1.67 meter; The installation distance is 1.71meter.
If place the 1.27meter width mesh, length of the tube is 1.31 meter; The installation distance is 1.35meter.
Machine size: 75x24x46 inch (190x60x117cm)
Net weight: 60lb/ 27kg
Gross weight: 64lb/29kg
Packing size: 30x17x11 inch (76x44x28 cm)
